Fall Ribbon Wreath DIY


As the fall season approaches, many stores are filling up with autumn decor. Dave from Dave’s Risa Things is excited to showcase his latest creation: a beautiful ribbon wreath. Using a 14 inch wire wreath frame and five different two and a half inch wired ribbons, Dave demonstrates how to create the perfect fall wreath.

To begin, Dave cuts 8 inch lengths of each ribbon and dovetails the ends for a finishing touch. He then creates 18 bundles of three ribbons each, using twine to tie them together. Once the bundles are complete, Dave attaches them to the wreath frame, creating a V-shape in each section. He finishes off the wreath with some final touches, including fluffing out the ribbons and securing them with hot glue.

Subscribe to Dave’s Wreaths and Things on YouTube

Popular Articles10+ AMAZON MUST Have Crafting Tools AND Supplies!
4 Quick & Easy DIY’s That You Can SellBuy Your Craft Supplies at Dollar Tree starting at $1.25!
17 Homemade Gift Ideas In 6 Minutes50 *BEST* Dollar Tree Mason Jar HACKS & DIYs!
Upcycled Simple Crafts You Can Make And Sell From Home!Mod Podge Faux Stained Glass Projects
Genius Dollar Tree Candle Hacks You Need To See!25 Places To Sell Your Crafts Or Handmade Products Online
30 Mind Blowing DIY Projects You Can Make With A CRICUT!How to Make a Wire Beaded Bracelet

Key Takeaways

  • The ribbon wreath requires 720 inches of ribbon in total.
  • Dovetailing the ends of the ribbon adds a beautiful finishing touch.
  • Creating V-shapes with the ribbon bundles adds depth and dimension to the wreath.

Materials Required

To create a beautiful fall ribbon wreath, the following materials are required:

  • 14 inch wire wreath frame (available at Dollar Tree)
  • Five different 2.5 inch wired ribbons (two rolls of each color in each pattern)
  • Twine
  • Crafting supplies

For the ribbon wreath, each ribbon needs to be cut into 8-inch lengths. For each pattern, 18 pieces of ribbon need to be cut. Therefore, each ribbon will be 144 inches, and a total of 720 inches of ribbon is required to make the wreath.

After cutting the ribbons, dovetails need to be added to each end. This is done by folding the ribbon in half and cutting on an angle.

To create the bundles, one ribbon of each pattern and color is used. The ribbon is scrunched up in the middle to create a bow, and then a piece of string is wrapped around the center. The bundles are then attached to the wire wreath frame using twine.

The wreath is created by attaching three bundles in a V-shape per section. The pattern followed is going up, down, up, down. Once the bundles are attached, they can be positioned and secured with hot glue.

Cutting the Ribbons

Dave from Dave’s Risa Things is excited to share his fall wreath creation using wired ribbons. He begins by using a 14-inch wire wreath frame from Dollar Tree and five different two and a half inch wired ribbons. He cuts 18 pieces at eight inches for each pattern, resulting in 144 inches per ribbon and a total of 720 inches of ribbon. Dave dovetails each end of the ribbon to finish it off and creates 18 bundles for the wreath. He randomly selects one ribbon of each pattern and color for each bundle and ties them together using twine.

Dave attaches the bundles to the wire wreath frame, creating a V-shape per section. He attaches the bundles to the wire frame using twine, making sure to double knot it and cut off the excess. Dave repeats this process for each section of the wreath, zigzagging up and down the wire frame. He positions the bundles and secures them in place with a dab of hot glue on each side of the twine. The end result is a full and beautiful fall wreath, perfect for the upcoming season.

Creating the Dovetails

To create the ribbon wreath, the first step is to cut the ribbons into 8-inch lengths. For each ribbon, there are 18 pieces to be cut, which will result in 144 inches per ribbon and 720 inches of ribbon in total. Once the ribbons are cut, it’s time to add dovetails to each end. A dovetail is a finishing touch that involves folding the ribbon in half and cutting on an angle. The angle can be shallow or deep, depending on personal preference.

After dovetailing each end of the ribbon, it’s time to create bundles. To make one bundle, take one ribbon of each pattern and color, find the middle, and scrunch it up with your finger. Then, create a bow and add another ribbon onto the bundle. Use twine to wrap around the center of the bundle, and tie it in a double knot. Don’t cut the twine, as it will be used to attach the bundle to the wreath.

To attach the bundles to the wreath, start by laying out the wire wreath frame and attaching the bundles in a V-shape per section. Use twine to attach the bundles to the wire wreath frame, and tie it in a double knot. Once all the bundles are attached, use a hot glue gun to add a dab of glue on each side of the twine to ensure it stays in place. The pattern for attaching the bundles is to go up, down, up, down, creating a zigzag all the way around the wreath.

Creating the Bundles

To create the ribbon wreath, Dave is using a 14-inch wire wreath frame from the Dollar Tree and five different two and a half inch wired ribbons from the Dollarama. He is cutting each ribbon into 8-inch lengths and dovetailing each end. For each ribbon, he is cutting 18 pieces at 8 inches, resulting in a total of 720 inches of ribbon.

Dave is creating 18 bundles for the wreath, with three bundles per section. He is randomly selecting one ribbon of each pattern and color for each bundle. To create the bundles, he is folding the ribbon in half, finding the middle, and creating a bow. He is using twine to wrap around the center of the bundle and tying a double knot.

To attach the bundles to the wire wreath frame, Dave is using the second inner wire to attach the first bundle on the inside and the second outer wire to attach the second bundle on the outside. For the third bundle, he is attaching it on the same wire as the first bundle to create a V-shape within the section. He is repeating this pattern of attaching the bundles in a zigzag manner all the way around the wreath.

After attaching the bundles, Dave is using hot glue to secure the twine to the wire and ensure that it stays in place. He is also twisting and positioning the bundles to his liking before gluing them down.

Assembling the Wreath

To assemble the wreath, Dave is using a 14-inch wire wreath frame from the Dollar Tree and five different two and a half-inch wired ribbons from the Dollarama. He has bought two rolls of each color in each pattern, and he is cutting 18 pieces at eight inches for each pattern. For each ribbon, he is cutting 144 inches, and 720 inches of ribbon in total to make this wreath.

After cutting the ribbons, Dave is dovetailing each end of the ribbon to finish it off. To create the bundles, he is using some twine and cutting 18 of them in total because they are going to create 18 bundles for the wreath per section.

To create the bundles, Dave is picking random ribbon and using one ribbon of each pattern and color for each bundle. He is taking the ribbon, finding the middle, scrunching it up with his finger, and then creating the bow at the same time. Once the bundle is ready, he is taking a piece of string, laying it down, and then face side down, he is laying that little bundle and wrapping the twine right around the center. He is not pulling it as soon as he does the first knot, and he is flipping it over to make sure he is centered and everything is kind of bundled in there.

Once the bundles are done, Dave is laying out the wire wreath frame and creating a V-shape per section. He is attaching the bundles using twine, feeding those twine pieces through the holes, tying it in a little knot, and double-knotting it. Once the knot is nice and secure, he is chopping off the excess with his scissors.

He is adding the third and final bundle in each section, making a little V-shape within the section. He is going up down up down, and then he is twisting them around and positioning them the way he wants them. Finally, he is taking his hot glue gun and adding a little dab of glue on each side of that twine, making sure that the glue attaches the twine to the wire and then it’s not going to go anywhere.

Final Touches

After cutting and dovetailing all of the ribbon, the next step is to create the bundles. Using twine, the speaker creates 18 bundles in total, with three bundles per section of the 14-inch wire wreath frame. Each bundle consists of one ribbon of each pattern and color, with a length of 144 inches per ribbon and a total of 720 inches of ribbon used for the wreath.

To attach the bundles to the wreath frame, the speaker ties each bundle onto the wire frame using the twine, creating a V-shape within each section. The pattern used is to go up, down, up, down, zigzagging around the wreath. Once all 18 bundles are attached, the speaker uses hot glue to secure the twine to the wire frame, ensuring that the bundles stay in place.

Finally, the speaker positions the bundles to their desired placement and fluffs them up to create a full and beautiful ribbon wreath.

Kim Lazaroe

Hi, my name is Kim. I've always enjoyed making crafts for each holiday and season throughout the year. My fond memories are making crafts with my mom or helping my dad build something around the house. Now I get to create new crafting memories with my daughter and husband as well as share my knowledge and experience in crafting with the world. Hope you enjoy my site.

Recent Posts