Decoupaging Furniture with Fabric / Trash to Treasure End Table Upcycle


Fabric decoupage is a popular DIY technique that involves applying fabric to furniture to create a unique and personalized look. In this step-by-step tutorial, Deidra from Our Upcycled Life demonstrates how to decoupage with fabric using a thrifted scarf and a pink chalk-painted end table.

Subscribe to Our Upcycled Life on YouTube

First, Deidra paints the end table with two coats of pink chalk paint and lets it dry completely. She then cuts the scarf slightly larger than the table surface and applies a liberal amount of poly acrylic sealer to the table.

She lays the fabric onto the sealer and smooths out any wrinkles or bubbles. After the sealer dries, she sands the surface and applies a second coat of sealer. Finally, she cuts off the excess fabric and sands the edges before applying one last coat of sealer.

Key Takeaways:

  • Fabric decoupage is a fun and easy way to upcycle furniture and create a unique look.
  • When selecting fabric for decoupage, choose a thin, absorbent material that will soak up the poly acrylic sealer.
  • Applying a liberal amount of sealer and spreading it right to the edges will ensure a smooth and crisp finish.
Popular Articles10+ AMAZON MUST Have Crafting Tools AND Supplies!
4 Quick & Easy DIY’s That You Can SellBuy Your Craft Supplies at Dollar Tree starting at $1.25!
17 Homemade Gift Ideas In 6 Minutes50 *BEST* Dollar Tree Mason Jar HACKS & DIYs!
Upcycled Simple Crafts You Can Make And Sell From Home!Mod Podge Faux Stained Glass Projects
Genius Dollar Tree Candle Hacks You Need To See!25 Places To Sell Your Crafts Or Handmade Products Online
30 Mind Blowing DIY Projects You Can Make With A CRICUT!How to Make a Wire Beaded Bracelet

Choosing the Project

In the video, Deidra from Our Upcycled Life shares her passion for thrifting, upcycling, repurposing, and DIY projects. She demonstrates how to decoupage furniture with fabric using a step-by-step tutorial.

Deidra explains that she found an end table on the side of the road, which she plans to upcycle with fabric decoupage. She emphasizes the importance of choosing a lighter base color to paint underneath the fabric to prevent it from showing through. She recommends selecting a fabric that is absorbent and not too thick to ensure that the poly acrylic sealer can soak through the material.

Deidra suggests visiting the scrap fabric section or the bed sheet section of thrift stores to find suitable fabric for this technique. She advises matching the paint color with the fabric to create a cohesive look.

After painting the end table with two coats of pink chalk paint and sanding it down with 220 sandpaper, Deidra applies a liberal amount of poly acrylic sealer onto the fabric. She ensures that the sealer spreads evenly and smoothly onto the fabric. Then, she places the fabric onto the end table and smooths out any bubbles and wrinkles.

Deidra repeats the process of applying the poly acrylic sealer and sanding the top with 220 sandpaper three times. She cuts off the extra material and sands the edges with the sandpaper. Finally, she distresses the whole cabinet and wipes it with a damp rag before applying one last coat of poly acrylic sealer.

Overall, Deidra’s tutorial provides a clear and knowledgeable guide to choosing the right fabric and applying the decoupage technique to upcycle furniture.

Preparing the Furniture

To begin decoupaging with fabric, it is important to prepare the furniture properly. First, ensure that the furniture is structurally sound and free of any damage. Next, choose a light-colored base coat to paint the furniture with. This will prevent the color from showing through the fabric once it is decoupaged.

After painting the furniture with two coats of chalk paint, allow it to dry completely. Then, sand the surface with 220-grit sandpaper and wipe it clean with a damp rag.

When selecting fabric for decoupaging, choose a thin, absorbent material such as cotton or a scarf. A thicker material will not allow the poly acrylic sealer to soak through properly.

To begin decoupaging, apply a liberal amount of poly acrylic sealer to the furniture surface. Then, lay the fabric over the surface, ensuring that it is smooth and free of bubbles and wrinkles. Apply more poly acrylic sealer to the fabric, spreading it evenly over the entire surface.

Once the fabric is completely covered with poly acrylic sealer, allow it to dry completely. Then, sand the surface lightly with 220-grit sandpaper and wipe it clean with a damp rag. Apply a second coat of poly acrylic sealer, spreading it evenly over the entire surface.

When the second coat is dry, cut off any excess fabric using a sharp exacto knife. Sand the edges with 220-grit sandpaper to remove any remaining fabric fibers. Finally, apply one last coat of poly acrylic sealer, spreading it evenly over the entire surface and ensuring that it goes right out to the edges.

By following these steps, you can easily prepare your furniture for decoupaging with fabric.

Selecting and Preparing the Fabric

When it comes to decoupaging with fabric, it’s important to select the right type of fabric and prepare it properly. According to Deidra from Our Upcycled Life, a thin cotton or scarf-like fabric works best for this technique. Thicker fabrics may not absorb the poly acrylic sealer properly, resulting in a less-than-perfect finish.

Before decoupaging, it’s also important to paint the surface with a lighter color, such as a light pink, to prevent any dark colors from showing through the fabric. Once the surface is painted and dry, it should be sanded with 220-grit sandpaper and wiped clean with a damp rag.

When it comes to applying the poly acrylic sealer, Deidra recommends using a liberal amount to ensure the fabric can soak it up properly. The sealer should be spread evenly and smoothly, and a chiseled wedge paintbrush works well for this purpose.

After applying the sealer, the fabric should be laid onto the surface and smoothed out to remove any bubbles or wrinkles. The excess fabric should be left to overlap the edges of the surface slightly. Once the fabric is in place, another coat of poly acrylic sealer should be applied on top, making sure to spread it evenly to the edges.

Once the sealer is completely dry, the excess fabric can be trimmed off using a sharp exacto knife. Finally, the edges of the surface should be sanded down and wiped clean with a damp rag before applying one last coat of poly acrylic sealer.

Overall, selecting the right fabric and properly preparing it is key to achieving a beautiful decoupaged finish.

Applying the Fabric to the Furniture

In this video tutorial, Deidra from Our Upcycled Life demonstrates how to decoupage furniture with fabric. She starts by painting an end table with two coats of light pink chalk paint and sanding it down with 220 grit sandpaper. Deidra emphasizes the importance of painting underneath a lighter color to avoid it showing through the fabric.

Next, she cuts a scarf slightly larger than the top of the end table and applies a liberal amount of poly acrylic sealer to it. Deidra recommends using a thin cotton fabric to ensure it can soak up the sealer properly. She then places the fabric onto the end table, smoothing out any bubbles or wrinkles, and allows it to dry completely.

After sanding the fabric-covered end table with 220 grit sandpaper, Deidra applies two more coats of poly acrylic sealer, spreading it out to the edges. She then cuts off the excess fabric with a sharp exacto knife, ensuring she cuts straight along the edge of the table.

Finally, Deidra sands the edges of the fabric-covered end table with 220 grit sandpaper and applies one last coat of poly acrylic sealer, spreading it out to the edges. She distresses the whole cabinet to allow some of the orange to peek through, creating a tropical boho feel end table.

Deidra recommends trying this technique with scrap fabric from thrift stores and matching the paint color to the fabric. With the right materials and technique, anyone can easily decoupage furniture with fabric.

Sealing the Fabric

When decoupaging fabric onto a surface, it is important to seal the fabric to ensure that it stays in place and looks smooth and neat. In her tutorial, Deidra from Our Upcycled Life recommends using a polyacrylic sealer to decoupage the fabric onto the surface. She suggests using a thin, absorbent fabric like cotton or a scarf to ensure that the polyacrylic sealer can soak through the material and create a smooth surface.

To begin, Deidra paints the surface with a light-colored paint to ensure that it won’t show through the fabric. She then applies a liberal amount of polyacrylic sealer to the surface and lays the fabric on top, smoothing out any bubbles or wrinkles. Once the fabric is in place, she applies another coat of polyacrylic sealer on top, spreading it out to the edges to ensure a smooth finish.

After allowing the sealer to dry completely, Deidra sands the surface with 220 grit sandpaper to create a smooth finish. She repeats this process two more times, allowing the sealer to dry completely between each coat. Once the final coat is dry, she cuts off any excess fabric and sands the edges to create a clean, crisp edge. Finally, she applies one last coat of polyacrylic sealer to ensure that the fabric stays in place and looks smooth and neat.

Overall, sealing the fabric is an important step in the decoupage process, and using a polyacrylic sealer can help ensure a smooth, professional finish. By following Deidra’s step-by-step tutorial, anyone can create a beautiful, upcycled piece of furniture using fabric decoupage.

Adding the Finishing Touches

In this step-by-step tutorial, Deidra from Our Upcycled Life demonstrates how to decoupage fabric onto furniture. She starts by painting an end table with two coats of light pink chalk paint and sanding it down with 220 sandpaper.

Deidra uses a scarf that she found at a thrift store for $5.99 as the fabric to decoupage onto the table. She emphasizes the importance of choosing a fabric that is thin and absorbent so that it can soak up the poly acrylic sealer.

To decoupage, Deidra uses a poly acrylic sealer, which she finds to be thinner and easier to spread than Mod Podge. She applies a liberal amount of the sealer onto the table and lays the fabric on top, smoothing out any bubbles or wrinkles.

Once the fabric is in place, Deidra applies another coat of poly acrylic sealer on top, making sure to spread it out to the edges. After letting it dry completely, she sands the top with 220 grit sandpaper and applies a second coat of sealer. She repeats this process three times, letting it dry in between each coat.

Deidra then cuts off the extra fabric by making a slit into each corner and using a sharp exacto knife to cut along the edge of the table. She sands the edge with 220 grit sandpaper and wipes it with a damp rag before applying one last coat of poly acrylic sealer.

Finally, Deidra distresses the whole cabinet and lets it dry completely. The end result is a cute and unique end table with a tropical boho feel. Deidra encourages viewers to try this technique with fabric from the thrift store and a little project.

Final Product

In this video, Deidra from Our Upcycled Life demonstrates how to decoupage furniture using fabric. She starts by painting an end table with two coats of pink chalk paint and sanding it down with 220 sandpaper. Deidra advises that when decoupaging on a surface, it is important to paint underneath a lighter color to avoid any color showing through the fabric.

The fabric used for decoupaging is a scarf that Deidra found at a thrift store. She emphasizes that when picking a fabric, it is essential to choose something that is thin and absorbent, like cotton or a scarf. Deidra uses a poly acrylic sealer to decoupage the fabric onto the table, spreading it liberally and ensuring that it soaks through the material.

After smoothing out any bubbles and wrinkles, Deidra puts a coat of poly acrylic sealer on top of the fabric and lets it dry completely. She repeats this process three times, letting it dry in between each coat. Once the top is completely dry, Deidra sands it down with 220 grit sandpaper and wipes off any dust or debris. She then cuts off the extra material by cutting a slit into each corner and using a sharp exacto knife to cut through the fabric.

After sanding it down again and wiping it with a damp rag, Deidra puts on one last coat of poly acrylic sealer, making sure to spread it right out to the edges. Once the top is completely dry, Deidra distresses the whole cabinet to give it a little bit of an orange peek through. The end result is a cute tropical, boho feel end table that was created from an ugly looking table that was found on the side of the road.

Overall, Deidra’s step-by-step tutorial on fabric decoupage is easy to follow and provides helpful tips for picking the right fabric and ensuring a smooth finish. This technique is a great way to upcycle furniture and give it a unique, personalized touch.

Kim Lazaroe

Hi, my name is Kim. I've always enjoyed making crafts for each holiday and season throughout the year. My fond memories are making crafts with my mom or helping my dad build something around the house. Now I get to create new crafting memories with my daughter and husband as well as share my knowledge and experience in crafting with the world. Hope you enjoy my site.

Recent Posts